LED lighting IR infrared sensor,Touch switch, human body induction switch ,For led strip 4014/5630/7020/2538/5050/3528

Product specification parameters:

1 working voltage: 9-24V

2 working current: 2A

3 load power: 50W

4 static current: 3mA

5 induction distance: 30-60CM (adjustable)

6 induction angle: 120

7 work brightness: 100%

8 time delay: 5S-80Min adjustable

9 ambient temperature: -+40 C -20 C

10 dimensions: 40*10*1.2 (mm)

(Note: test conditions Vin=24V)

instructions:

1, intelligent detection, people come to light, people go off.

2, effective continued to open, when the human body in the detection area of continuous activity, the module is effective and continuous open state.

3, time delay, when the human body to stop the activity in the probe area, the module delay time (factory can be set), the automatic shutdown of the output.

4, short time aging latch function, in the closing

of the output moment, the module is locked into the 0.5s-2s time, at this time the human action signal is invalid.

Product specification parameters:

1 input voltage: 7v-12v

2 output voltage: 7v-12v

3 load power: 24W

4 load current: 2A

5 standby current: 50mA (including indicator)

6 induction distance: 10cm

7 standby power consumption: 0.6W

8 working environment temperature: -20 degrees C~65 degrees C

9 dimensions: 30mm*12mm*1.2mm

(Note: test conditions Vin=12V)

instructions:

1 IR_Sensor_V00 (cyclic dimming):

V00 circular dimming version, fast hand sweep switch status. In the closed case, the fast hand sweep into the open state, long occlusion is invalid. In the open state, long blocking access to circulating dimming, let go that lock brightness, again luminance switch for the last lock brightness.

Control panel with red and blue backlight, without blocking action, the blue light, red light out; there is a block action, blue light, red light.

2.IR_Sensor_V01 (one way dimming):

V01 one way dimming version, fast hand sweep switch status. In the closed case, the fast hand sweep into the open state, long occlusion is invalid. In the open state, long occlusion into one-way dimming (to the light or the dark state), let go that lock brightness, again luminance switch for the last lock brightness.

Control panel with red and blue backlight, without blocking action, the blue light, red light out; there is a block action, blue light, red light.

3.IR_Sensor_V02 (non dimming switch):

V02 non dimming general switch version. Fast hand sweep to do lighting switch. Long time occlusion entry is not valid.

Control panel with red and blue backlight, without blocking action, the blue light, red light out; there is a block action, blue light, red light.

Product specification parameters:

1 input voltage: 9v-24v

2 output voltage: 9v-24v

3 load power: 30W

4 load current: 3A

5 standby current: 10mA

6 standby power consumption: 0.1W

7 working environment temperature: -20 degrees C~65 degrees C

8 model: Touch_S (L40W10)

9 dimensions: 40mm*10mm*1.2mm

(Note: test conditions Vin=12V)

Model introduction:

Touch_Sensor_S00 (general switch):

S00 mode, fast touch switch lights on / off state, not with dimming function. Effect gradient.

Touch_Sensor_S01 (one way dimming):

S01 mode, quick touch switch lights on / off state; in the open, long touch into one-way transfer of light (keep touching, dimming to maximum or minimum brightness, automatic stop dimming), namely, let go lock brightness again luminance switch for the last lock brightness. In the closed case, the long touch will start from the last light to a more bright direction. Effect gradient.

Touch_Sensor_S02 (cyclic dimming)

Mode of S02 and quick touch switch lamp on / off state; in the open, long touch into circulating dimming (keep touching, dimming to maximum or minimum brightness, automatic in the opposite direction dimming, so the cycle), let go that lock brightness again luminance switch is on lock brightness. In the closed case, the long touch will start from the last light to a more bright direction. Effect gradient.

Touch_Sensor_S03 (three sections dimming)

S03 mode, fast touch switch lamp brightness status. Brightness points three, respectively, 30%, 60%, 100%, switching effect gradient